3
Adjust Hose Length
1. With the hose assembly (d) connected at the cleaner return line, extend the
end of the hose to the farthest point of the pool. Do not include steps or
seating areas.
2. The end of the hose should be within 6" (15 cm), longer or shorter, of
farthest point.
•
If hose is too short, add a feed hose section with floats, a swivel and two
hose nuts, available through your local Polaris dealer. Adjust to proper
length.
3. Cut the hose so that it is within 6" (15 cm) of the farthest point.
Walk hose around to
determine farthest point.
6
Cut to
within 6"
(15 cm) of the
farthest point
Couper à 15 cm du point le plus éloigné
Corte a 15 cm o menos del punto más lejano