Stand-By Mode; Maintenance And Cleaning - Ascaso Dream PID Manual Del Usuario

The table of parameters and available values is given below:
Param. Value - Description
C
Ud
F
0
Pr
1
2
3
4
5
ON
Cr
OFF
OFF
OFF
0.5
001
002
X
U
7.

Stand-by mode

An energy saving mode is included
in the PID models, which turns the
machine off after two hours without
activating a function.
When stand-by mode is on, only pilot
light remains lit while all others are
6
turned off.
To turn the machine on again, just
press any of the buttons for the
machine to go back to its initial status,
as if turned on for the first time.
NB! The function can be turned
on and off using the PID system
controls and
21 22 23
of this manual.
Degrees Celsius
Degrees Fahrenheit
Pre-infusion off
Pre-infusion 1 s
Pre-infusion de 2 s
Pre-infusion de 3 s
Pre-infusion de 4 s
Pre-infusion de 5 s
Timer on
Timer off
Stand-by mode OFF
Stand-by mode ON, starting in 0.5 h
Stand-by mode ON, starting in 1 h
Stand-by mode ON, starting in 2 h
X indicates the offset between the set tempe-
rature and the one shown on the display
. See section 6
8.

Maintenance and cleaning

Cleaning and preventive care of the
machine's internal system is vital if an
espresso of optimum quality is to be
obtained.
General warning! Cleaning and
maintenance should be done when
the machine is cool and disconnected
from the power source. Do not
place the machine under water. Not
dishwasher safe.
ascaso
Default value
C
0
OFF
OFF
0
29