Keys Locked; Reset; Air Discharge; Chrono - Dal Zotto Valli idro Manual Del Usuario

KeyS LOcKeD

The menu allows to lock the display keys (like mobile phone). Press keys 1 and 5 simultaneously.
With the function activated, "
CONTROLS PROCEDURE
Press the key 6, Set cLOcK will appear.
Š
Press key 2 several times until "uSer" is displayed
Š
Š Press key 6.
"Set therMOStAt" will appear
Š
Press key 2 until "KeyS LOcKeD" is displayed.
Š
Use keys 4-5 to enable/disable.
Š
Press key 6 to confirm and 1 to return to the menu
Š
back to the initial status.

reSet

Allows to reset all values modifiable by the user to the default values. The modified data are:
CONTROLS PROCEDURE
Press the key 6, Set cLOcK will appear.
Š
Press key 2 several times until "uSer" is displayed
Š
Press key 6.
Š
"Set therMOStAt" will appear
Š
Press key 2 until "reSet" is displayed.
Š
Use keys 4-5 to select On and press key 6.
Š
The word " DOne" will be displayed to confirm
Š

Air DiSchArge

This function allows venting any air in the stove. Upon activating the function: The indicator lights of the circulators will light up on the display.
(the pumps will be powered for 15 minutes and 30 seconds and then will stop for 30 seconds; cut the power to interrupt)
CONTROLS PROCEDURE
Press keys 1 and 4 simultaneously.
Š
You will be prompted to enter the password.
Š
Š Enter code "77", using key 4
Confirm using key 6.
Š

chrOnO

The chrono allows to program 4 time spans within a day to use every day of the week.
the switch-on and switch-off time can be set in every time span. along with the
days of use of the programmed time span and the desired h2O temperature (65
- 80°c).
RECOMMENDATIONS
The ignition and switch-off times must be within the arc of
one day, from 0 to 24 and not over several days:
Before using the chrono function, set the current day and
time. Therefore check that the points listed in the "Set clock"
sub-chapter have been followed, so that the chrono function
works. Aside from programming it, activate it as well.
70
" will appear every time a key is pressed.
KeyS LOcKeD
Š SET h2O = 75°C
Š SET TEMPERATURE = 35°C
Š SET POWER = 5
Š ENABLE ChRONO = OFF
Š START PRG1=OFF
Š STOP PRG1 = OFF
Š MONDAY PRG1 = OFF
Š .......all chrono parameters OFF
Š PELLET = 00%
Š STAND BY = OFF
Example:
Switch-on time 07:00 cOrrect
Switch-off time 18:00
incOrrect
Switch-on time 22:00
Switch-off time 05:00
| engLiSh