Publicidad
The R-1's controls and connectors
fig.panel-1
1
Internal mic
This is a stereo microphone that's built into the R-1.
You can't use the internal microphone if a microphone or other device is connected to
the mic jacks
don't connect anything to the other input jacks.
When recording via the internal microphone, set the mic type select switch to DYN.
2
Display
Various information about the R-1's operating state is shown here.
3
EFFECT button
Press the EFFECT button to switch the effect on/off.
This button will light red when the effect is on.
If you turn this on before or during playback, the effect will be applied to the sound that
is being played back. If you turn this on before or during recording, the effect will be
applied to the sound that is being input; i.e., the sound that has been processed by the
effect will be recorded.
The R-1 provides various effects that let you modify the sound being played back or
recorded, giving the sound more impact or allowing more comfortable listening. You
can also transform the sound to give it a totally new character.
4
EDIT button
Use this button to make effect settings.
For details on the effects, refer to "Using effects" (p. 46). You can make effect settings
regardless of whether the EFFECT button is on or off.
12
1
2
3
4
5
7
8
11
12
or line input jacks
6
9
10
13
. If you want to use the internal microphone,
14
15
16
Publicidad
