Descargar Imprimir esta página

Publicidad

Effect list

01
Easy EQ
02
For Speech
03
Voice Perform
04
Editable EQ
Noise Reduc-
05
er
Hum Noise
06
Cut
07
Reverb
08
Int-Mic Rec.
09
Ext-Mic Rec.
Eleven settings are provided for use with styles such as rock, pop, or
dance. Each setting modifies the tonal character (frequency response)
appropriately for the selected style of music. For example, the Rock
setting boosts the low and high frequency ranges to give the sound
greater impact. The Pop setting makes it easier to hear the range in
which the melody is usually played. The Vocal setting makes the lyrics
more audible. The Flat setting simply outputs the sound without any
change in tonal character.
Internally, this effect uses a ten-band graphic equalizer.
This effect is appropriate for material that is mainly a speaking voice,
such as conversation or dialog. It clarifies the voice, and also reduces
the sibilance (unpleasant exaggeration of sounds beginning with "s")
that can occur when recording with a microphone.
Internally, this effect combines a de-esser and an enhancer.
This effect can completely transform the character of a voice by modi-
fying the pitch of the sound. You can use the provided settings to cre-
ate comical voices, low monster-like voices, or voices that have a
"springy" character.
Internally, this combines a pitch shifter and a delay.
This is a ten-band graphic equalizer with adjustable gain. For each
band, you can adjust the gain in a range of -12 dB– +12 dB to modify
the tonal character of the sound.
This effect reduces the "hissing" or "rushing" background noise that
may be heard during silent portions of a recording, or the hiss that is
often heard on an analog record or cassette tape.
Internally, this combines a noise gate and a notch filter.
This effect reduces the low-pitched "hum" that can occur when re-
cording from a microphone or when a motorized device is located
nearby.
Internally, this is a notch filter.
When you listen to sound, you are hearing not only the sound that
comes directly from the source to your ears, but also the sound that re-
flects off the floor and walls. These reflections are called "reverbera-
tion" (reverb), and their character will vary depending on the size of
the room and the material of which the walls are constructed.
This effect adds simulated reverberation to the original sound, pro-
ducing a natural-sounding impression of spaciousness.
This effect modifies the character of the sound recorded from the in-
ternal mic or a miniature condenser mic connected to the mic input
jack, giving it the character of sound recorded from a larger mic. It can
simulate the characteristics of famous mics used in recording studios,
giving your sound a professional touch.
This effect is particularly useful when applied during recording.
This effect modifies the character of the sound recorded from a typical
small dynamic mic connected to the mic input jack, giving it the char-
acter of sound recorded from a larger mic. It can simulate the charac-
teristics of famous mics used in recording studios, giving your sound
a professional touch.
This effect is particularly useful when applied during recording.
Using effects
p. 49
p. 49
p. 49
p. 49
p. 49
p. 50
p. 50
p. 50
p. 50
47

Publicidad

loading