Roland EDIROL R-1 Manual Del Usuario página 53

1.
While in playback or in recording-standby mode, press the R-1's
turn it on (lit).
2.
Press the EDIT button
3.
Use the VALUE dial
.
button
Each effect has various "parameters" (settings) that adjust the effect. When you
select an effect type, its parameters will have the default settings.
When you change the effect type, the currently set parameter values are cleared.
* If you decide not to change the effect type, press the
Effect mode.
4.
Now you can select a parameter. Use the
then press the
ENTER button
* If you decide not to select a parameter, press the
* If you want to return to the effect selection, press the
5.
Now you can edit the parameter. Use the
for the parameter, and then press the
6.
Press the EDIT button
If you want to return to the parameter selection, press the
The effect parameter settings you make are remembered until you change
them.
. You will enter Edit mode.
to select the desired type of effect, and then press the
VALUE dial
.
VALUE dial
EXIT button
to leave Effect mode.
EFFECT button
or the
EXIT button EDIT button
to select a parameter, and
to leave Effect mode.
EDIT button
.
EXIT button
to specify the desired value
.
EXIT button
Using effects
to
ENTER
to leave
.
53