Premature Heat-Sealing; Canceling The Vacuum-Sealing Process - Gaggenau DV 461 710 Manual De Instrucciones

At the end of the process, the compartment is ventilated,
and an acoustic signal sounds. You can now open the
glass lid and remove the heat-sealed vacuum-sealing bag
from the compartment.
9
WARNING
Risk of Burns!
The heat-sealing bar in the vacuum-sealing
compartment becomes extremely hot if the
appliance is used over an extended period of time
and there are long heat-sealing times. Never touch
the hot heat-sealing bar. Keep children away from
the appliance.
Notes
At the highest vacuum-sealing level, the process may
▯
last up to 2 minutes. After this time, the bag is heat-
sealed and the vacuum-sealing level that is reached
lights up.
After vacuum-sealing, check the heat-sealing seam on
▯
the bag. Carefully try to pull the seam apart. If it
comes apart, select a higher heat-sealing level and
repeat the process. If the seam is deformed, it has
become too hot. Select a lower heat-sealing level the
next time or allow the appliance to cool.
If you vacuum-seal food in bags several times in
▯
succession, the heat-sealing bar becomes
increasingly hotter. This may impair the quality of the
heat-sealing seam. After several vacuum-sealing
processes, you should select a lower heat-sealing
time or allow the appliance to cool for approx.
2 minutes between the processes.

Premature Heat-sealing

Use this function if you only want to pack your delicate
food in a bag so that it is air-tight, without the contents
sitting too tightly against the bag.
During the vacuuming process, touch the ± symbol to
end the process and heat-seal the bag early.
The appliance displays the vacuum-sealing level until it is
reached.
At the end of the process, the compartment is ventilated,
and an acoustic signal sounds. You can now open the
glass lid and remove the heat-sealed vacuum-sealing bag
from the compartment.
Note: To heat-seal the bag, the vacuum-sealing drawer
requires a specific vacuum level. If you touch the
± symbol first, the vacuum-sealing drawer pumps air out
of the compartment until this level has been reached. The
bag is then heat-sealed.

Canceling the Vacuum-sealing Process

During the vacuuming process, touch the ³ symbol to
cancel the process.
The appliance displays the vacuum-sealing level until it is
reached.
The bag is not heat-sealed. Slightly open the lid and
ventilate the compartment. An acoustic signal sounds.
You can now remove the vacuum-sealing bag from the
compartment.
en-us
11