Harman Mark Levinson 519 Manual Del Propietário página 20

SETTINGS MENU
 Encryption: shows the encryption method of
the current network.
 Subnet Mask: shows the subnet address
currently assigned (by DHCP or manually) to
your № 519.
 Default Gateway: shows the gateway address
currently assigned (by DHCP or manually) to
your № 519.
 DNS:
information about the connection.
o Configure: use this setting to connect to wired or
wireless networks.
 Connecting to a Wireless network:
• Ensure that Connection Type is set to
Automatic or Wireless Only (and not
Wired Only).
• To connect via network name (SSID),
either click Scan available networks or
input the network name manually. If
input manually, set the Encryption type
as well (None/WEP/WPA-PSK). Enter
the network key (password) if applicable,
scroll down and click Connect .
• To connect via WPS, first press the
WPS button on your router, and then
the WPS button on the rear of the №
519. Alternatively, you can also use
the Start WPS setting instead of the
physical button, found under Configure
> Wireless.
 Setting up a Wired network:
• Ensure that Connection Type is set
to Automatic or Wired Only (and not
Wireless Only).
• Connect a network cable.
• If
automatically connect, navigate to
Connect under Configure > Wired.
• If needed, you may disable DHCP and
set a static IP under Configure > Wired.
 Setting up SoftAP:
• To activate SoftAP, navigate to Configure
> Wireless > Start SoftAP.
• If you are currently connected to
a Wireless network, you will be
disconnected, as the device will now
broadcast its own network to which
18 N 519 AUDIO PLAYER /
0
displays Domain Name
Wired connection
OWNER'S MANUAL
• System: this folder contains options that affect the №
519's system as a whole.
System
does not
you can connect a mobile device or
computer for setup and control.
o Software Version: displays the current software
version installed on the unit.
o Config: manage the system settings in this menu.
 Export Settings to a file: export current unit
settings (to a .tar file) onto USB drive.
 Import Settings from a file: import unit
settings from a .tar file on a USB drive.
 Lock Settings: enable this setting to disallow
changing any of the № 519 unit settings. Your
installer may have enabled this feature to
prevent accidental changes to networking or
other critical settings in your № 519. If this
is the case, we recommend you contact your
dealer before changing any of your № 519's
settings.
o Update Firmware: lets you update your № 519's
firmware, either from a flash drive inserted in the
rear-panel USB Type A port, or from our online
server. You should allow the unit ample time to
perform and finish the update; it will take a few
minutes.
 To update via a flash drive:
• Insert flash
"sfupdate" file stored on it.
• Select USB Update – Update found on
USB stick .
 To update via network:
• The № 519 will automatically notify you
if there is an update available via a gear
icon at the top of the screen.
• Select Check for update online.
• If there is a newer version available,
the unit will give you the newer version
number and the option to install.
o Restore Factory Settings: restore all settings
to their factory defaults with this setting. All
customized settings will be erased.
drive with desired