The Rs-60 Front Panel - CESVA RS-60 Manual Del Usuario

RS-60
User's manual

3. THE RS-60 FRONT PANEL

This chapter describes the information provided by the illuminated indicators on the front
panel of the RS-60.
The panel features 3 illuminated indicators:

OK indicator
 HIGH indicator
 ON indicator
The ON indicator remains lit up while the RS-60 is connected to the mains. When the unit is
disconnected, the ON indicator goes out and the other indicators begin to flicker.
The RS-60 has two programmable warning levels: pre-alarm and alarm, each level with a
different limit. The pre-alarm limit is equal or inferior to the alarm limit. If the sound pressure
level measured by the sensor is lower than the pre-alarm limit (CORRECT level), the (green)
OK indicator will stay on and the (red) HIGH indicator will stay off. If the sound pressure level
exceeds the pre-alarm limit but does not reach the alarm limit, the (green) OK indicator
comes on and goes out every second for 125 milliseconds while the (red) HIGH indicator
remains on.
 When the sound pressure level exceeds the alarm limit, the (red) HIGH indicator stays on
and the (green) OK indicator goes out.

Sound level CORRECT
The indicators may be updated at a programmable periodicity of between 2 and 180
seconds (evaluation time).
The RS-60 detects whether the sensor is disconnected or has been manipulated. While
either of these anomalies persists, the OK and HIGH indicators remain on.
Alarm limit EXCEEDED
SENSOR ERROR
19
Pre-alarm limit EXCEEDED