Publicidad
Idiomas disponibles
Idiomas disponibles
5. RECOMMENDATIONS
To use the RS-60 correctly, we recommend that you observe the following instructions:
Always keep the RS-60 connected to the mains. When disconnected, it will continue
to function thanks to its internal battery.
Do not tamper with the official seals.
Do not attempt to manipulate the sensor.
When the continuous printing mode is programmed, make sure the printer connected
to the RS-60 has enough paper.
If you want to uninstall the limiter and store it for a long period of time, you should use
the TRANSPORT option of the programming menu, with the battery completely
charged (typical charging time: 4 hours, connected to the mains)
This equipment only can work with the accessories mentioned in the accessories
section. In case that using a different accessories and that this causes a failure in the
equipment,
will lose its warranty.
6. CONSIDERATIONS
The RS-60 is supplied with an internal clock and a memory (stores the configuration) fed by
a lithium battery, which lasts an average of 10 years. Should the battery run out, contact
technical staff, who will change it for you.
would not be responsible of this failure. Then the equipment
26
Publicidad
Capítulos
