Assembly; Scope Of Delivery; Transport - Holzmann KAP 255XJL Manual De Instrucciones

 Hearing disorders, if the ear protection of the operator is insufficient.
 Hazard of injury due to cracking workpiece and catapulted workpiece parts. To protect your
eyes from this kind of injury wear certified protective goggles.
 Treated wood may contain dangerous and/or harmful chemicals. These might be breathed in
together with wood dust. Hazard of damaging your respiratory system. Always wear a breath
mask when working with treated wood materials.
You can reduce dramatically the probability of an injury by obeying all security, operation and
maintenance rules.
12

ASSEMBLY

12.1

Scope of delivery

Check the machine and machine parts for hidden transport damage If you notice any transport
damage report it immediately, but latest 7 days after purchase to your dealer. Claims of transport
damage being placed after this time limit cannot be accepted anymore by HOLZMANN Maschinen
GmbH.
12.2 Assembly:
 To adjust the turntable (8), loosen the locking handle (10) by approx. 2 turns, which frees
the turntable (8).
 Turn the turntable (8) and scale pointer (11) to the desired angular setting on the dial (12)
and lock into place with the locking handle (10).
 Lightly press the machine head (4) down while at the same time pulling the retaining pin (16)
out from the motor mounting; this causes the saw to move down to the lower working posi-
tion.
 Swing the machine head (4) up until the retaining hook latches into place.
 The clamping device (19) and the workpiece support (20) can be fastened on both the right
 and left sides of the base plate (8).
 By loosening the tightening screw (13), the machine head (4) can be angled to the left up to
45°.
12.3

Transport:

When bringing the machine to the workplace you have to prepare it for transport.
These instructions have to be followed prior to every transport of the sliding compound saw
 Disconnect the machine from the power supply.
 Swing the saw arm into the lowest position and lock it in that position with the interlock knob
(16).
 Fix the saw arm with the sliding device fixing knob (14).
 Lift the machine only at the transport handle (29).
HOLZMANN Maschinen GmbH www.holzmann-maschinen.at
Zug-, Kapp-, Gehrungssäge / Profi mitre saw / Manual de instrucciones/Mode d´emploi
Assembly
Seite 32
KAP 255 XJL