Viewing And Deleting Measurements - Microlife WatchBP home S Manual De Instrucciones

Viewing and deleting measurements

Viewing measurements
1) When the M button is pressed, it displays the total
number of measurements stored, e.g. N=28, followed
immediately by the total number of measurements
with AFIB and then the average of all the
measurements. Every average reading can be viewed
by pressing the M button repeatedly.
Total No. of
readings
readings with AFIB
2) The last three individual measurements can be viewed
by pressing and holding the M button until a "1" is
displyed on the screen. The values will be displayed
sequentially.
11
Total No. of Average
Deleting measurements
Before deleting data, be sure that the measurement data is
*
not required. When your BP values are too high or when your
values show AFIB it is recommended to show your BP values
to your doctor.
1) Press the M button and hold it for 7 seconds until the
clear symbol shows up.
2) Release the M button and press it once more. This will
SYS
mmHg
delete all the measurements.
DIA
mmHg
Pulse
/min
Press and hold
M button for 7
seconds
SYS
mmHg
DIA
mmHg
Pulse
/min
Press M button
once again