Safety, Hygiene And Environment; General; Ce-Mark; Identification - Fri-Jado CSD 180 Hot Instrucciones De Manejo

CSD 180 Hot
1.

Safety, hygiene and environment

1.1.

General

The manufacturer accepts no liability whatsoever for loss or injury caused by failure to strictly
adhere to the safety guidelines and instructions in this manual or due to carelessness during
installation, use, maintenance and repair of the unit referred to in this manual and any of its
accessories.
The unit may be operated by qualified and authorised persons only. Anyone who works on or with
this unit must be familiar with the contents of this manual and carefully follow all guidelines and
instructions. Never change the order of the steps to be performed.
The management must instruct the personnel on the basis of this manual and follow all instructions
and regulations.
1.2.

CE-mark

The unit was built in accordance with European Guidelines and standards as specified in the CE
declaration delivered with your unit.
To ensure its proper functioning, use the unit solely in accordance with its purposes as stated in
EN 292-1. In this standard 'intended use' means the use for which this technical unit is suitable in
accordance with the technical specifications of the manufacturer inclusive of the directions in the
sales brochure.
In case of doubt it is the use which can be deducted from the construction, the model and the
function of the technical unit as being normal use. Operating the unit within the limits of its intended
use also involves following the instructions in the user manual and observing the inspection and
maintenance conditions.
1.3.

Identification

The identification plate is located on the service side
and contains the following data:
•
Name of the supplier or the manufacturer
•
Model
•
Serial number
•
Year of manufacture
•
Mains voltage
•
Frequency
•
Rated current
en / 2-II
9123529 / 0712