Replace The Lamp - Fri-Jado CSD 180 Hot Instrucciones De Manejo

6.1.

Replace the lamp

WARNING
Let the unit cool off for at least half an hour with all windows open.
The lamps are found in the upper cover and beneath
the presentation plateaus.
1. Remove the plug from the outlet.
2. Open all windows and let the unit cool off for at
least half an hour.
For the lamp in the upper cover:
3. Loosen the 7 screws in the ceiling around the
lighting, but do not remove them.
4. Carefully push against the slide holder until the
lighting module cannot slide in further.
5. Remove the two transparent plastic plates (A) from
the slide holder and take them out via the bottom of
the unit.
6. Remove the PL lamp by pulling it lengthwise out of
the holder. Do this carefully to avoid breaking.
7. Replace the lamp by one of the same type and go
through the steps you have just carried out in
reverse order.
For the lamp beneath the presentation plateau:
3. Dismount the neon lamp by turning it a quarter turn.
4. Replace the lamp by one of the same type.
A