Description Of The Unit; Operation; Intended Use; Parts - Fri-Jado CSD 180 Hot Instrucciones De Manejo

2.

Description of the unit

2.1.

Operation

The display warmer keeps the products warm by means of a warm airflow with a high humidity
level. The fan in the display ensures an even distribution of heat. The products maintain the
required quality in the display for a maximum of three hours.
The display has glass on three sides and the rear side has a reflecting rear window, allowing
optimum presentation of the products.
2.2.

Intended use

WARNING
The display-warmer is exclusively designed for keeping warm products warm and for
presenting them.
Any other use shall be considered to be not in conformity with the intended use. The manufacturer
accepts no liability whatsoever with regard to loss or injury that may be the consequence hereof.
The unit was built in accordance with European Guidelines and standards as specified in the CE
declaration delivered with your unit. Use the unit solely in technically perfect condition and in
conformity with the intended use described above.
2.3.

Parts

2.3.1. Overview of the unit
A5
A4
A3
A1 On/Off switch
A2 Temperature display
A3 Temperature setting
A4 Water tray rear side
A5 Door rear side
A6 Lighting beneath plateaus
A6
6
A1
A2
A7 Display/slide holder and lighting of upper
plateau
A8 Plateau (3 pieces)
A9 Flap window customer side (3 pieces)
A10 Covering panel of water tray
A11 Water tray
A7
A8
A9
A10
A11