LAVAZZA amodo mio Instrucciones De Uso página 18

I T EN
COMPONENTS OF THE CAPPUCCINO MAKER
Cappuccino maker lid
Notched crown
(to froth)
Smooth crown
(to heat and blend)
On and off switch
Cappuccino maker base
Measuring cup with handle
This machine can only be operated with original accessories provided
by the manufacturer.
No liability will be assumed for any damage caused by misuse of the
cappuccino maker or non-compliance with the instructions contai-
ned in this manual.
USE OF THE CAPPUCCINO MAKER
STARTING THE CAPPUCCINO MAKER
The first time using the cappuccino maker, lift the container (
remove the protective ring ( ) located inside the base. Place the
2
container on the base.
1
The coffee and cappuccino machine can be used individually or si-
multaneously.
Verify the presence of all the accessories and their integrity. After a
long period without use, consult the section "Maintenance and
Cleaning".
This product was only designed to heat and froth milk. Do not insert
other types of liquids or solids in the container. Do not leave the Cap-
puccino maker unattended when in use.
To get the best results, use cold milk from the fridge.
Make sure that the bottom of the container and the contact area
inside the base are clean and dry.
FILLING AMOUNT
Always respect the MIN and MAX level marked inside the container.
Do not operate the cappuccino maker with an empty container or
with a quantity of milk below the MIN level. This can cause the ma-
chine to overheat. In case of overheating, the machine will automa-
tically turn off. Do not fill the container over the MAX level, it may
cause hot milk to splash.
) and
1
2