Default Values Of Alarm Parameters; Default Values Of Digital Output Parameters; Information Menu - CARLO GAVAZZI WM20 Manual De Instrucciones

Default values of alarm parameters

Alarm Enable
1 No
2 No

Default values of digital output parameters

Digital
Function Al link
output
1 Puls
2
Alar

information menu

The information menu contains all pages that display information and parameters entered
without password protection.
NOTE: presence of the pages depends on the installed accessory modules.
Page title information displayed
• Serial number (page title)
12345678 • Year of manufacture
• Firmware revision
• System type (in title)
Conn
• Current transformer ratio (Ct)
(2 pages)
• Voltage transformer ratio (Vt)
Dmd Interval for average power calculation (min)
Led pulse Weight of pulse of front LED (kWh/kvarh per pulse)
Run hour Current threshold for calculating load operating hours (A)
Variables
VL1N
Wsys
Al status
Al 1 Ne
Al 2 Ne
Set 1 Set 2
40 40
40 40
Pulse Pulse
type weig
kWh 0.1
kWh 0.1
8021572 | WM20 | © 2016 | CARLO GAVAZZI Controls SpA
On delay
0
0
Power
Out test
test
No 0.001
No 0.001
31