Address Parameters - CARLO GAVAZZI WM20 Manual De Instrucciones

Sign position
NOTE: the Sign position is only available for the parameters Set 1 and Set 2 in the sub-
menus Virt Al 1 and Virt Al 2.
The value sign can be set in the position Sign. The value is positive by default.

Address parameters

The address parameters are divided into two parts: first part (Hi) on page 1/2 and second
part (LO) on page 2/2. For example the pages iP add 1/2 and iP add 2/2 with the address
set as 192.168.2.18 will be as follows:
The order of digit selection is from right to left on the firstline and then on the second line.
44
8021572 | WM20 | © 2016 | CARLO GAVAZZI Controls SpA