Reset Menu - CARLO GAVAZZI WM20 Manual De Instrucciones

Page title information displayed
• Data of alarm 1 (in title):
• None: alarm 1 disabled
• No out: alarm 1 enabled but not associated with a digital output
• Out 1.NE: alarm associated with digital output 1, normally closed
• Out 1.ND: alarm associated with digital output 1, normally open
• Out 2.NE: alarm associated with digital output 2, normally closed
Al 1 (2 pages)
• Out 2.ND: alarm associated with digital output 2, normally open
• Alarm activation threshold (Set1)
• Alarm deactivation threshold (Set2)
• Controlled variable
• If the alarm is active, the symbol
Al 2 (2 pages) Same information as pages Al 1, for alarm 2
Optical Baud rate of optical port
Com port Modbus address
(2 pages) Baud rate of RS485/RS232 port
iP add ½
IP address
iP add 2/2

Reset menu

The reset menu is made up of two pages used to reset the maximum and average power
values respectively (active, apparent and reactive).
display
appears permanently on
8021572 | WM20 | © 2016 | CARLO GAVAZZI Controls SpA
33