Warnings For Maintenance; Before Using; After Use - AUtec Modular Serie Manual De Usuario

LIMKDPU0
!
ENSURE THAT THE BATTERY HAS BEEN REMOVED
FROM THE TRANSCEIVING UNIT BEFORE CARRYING
OUT ANY MAINTENANCE WORK.
Any faults should be repaired by authorised Autec
personnel using original Autec spare parts only.
No particular maintenance needs to be carried out on the transceiving unit, but the
following should be done in order to always keep it reliable and safe:

BEFORE USING:

- make sure that the unit is integral and that the display or LEDs are intact and operational
- make sure that the gaskets, bellows and the actuator hoods (selectors and
pushbuttons) are whole, soft and elastic, and that the symbols on the panel, display
signals or LEDs can be seen clearly.
- avoid hitting the display or LED visualisation area

AFTER USE:

- always store the unit in a clean dry place,
- make sure that the battery seat is and contacts are clean,
- remove dust or any other material that has deposited on the transceiving unit with a
cloth that has been dampened with water (never use solvents or flammable/corrosive
materials to clean, and do not use high pressure water cleaners or stream cleaners).
When it is necessary to carry out special maintenance (radio remote control repair and
replacement of damaged or faulty parts), do not contact anyone other than our
Assistance Service. In order to make the intervention faster and more reliable, please
help us identify the radio remote control correctly and completely by giving:
- the serial number
- the purchase date (given on the guarantee)
- description of the problem found
- the address and telephone number of the place where the radio remote control is being
used
- the name of the person to be contacted
- the name of the company that supplied the radio remote control.
When communicating the data for identifying the radio remote control to the
Assistance Service, please inform them that a DATAFEEDBACK system is being
dealt with.
Before calling the Assistance technicians, it is advisable to make sure that the
given instructions have been followed correctly.
When scrapping, entrust the radio remote control to the separate scrap collecting
services in the user country.
5

WARNINGS FOR MAINTENANCE

SERVICE
SCRAPPING
Page 9