Holzmann BS 275GP Manual De Instrucciones página 28

5 MAINTENANCE
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Before first operation as well as later on every 100 operation hours you should lubricate all con-
necting parts (if required, remove beforehand with a brush all swarfs and dust).
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the saw blade and the saw blade guide.
The good condition and perfect adjustment of the guiding rollers is essential for a smooth blade
guidance and a clean cut.
Store the machine in a closed, dry location.
Repair jobs shall be performed by respectively trained professionals only!
The lubrication of the gearbox has been provided by the factory
After each workshift:
Bring the saw arm in the most upper position and secure it.
Detension the saw band.
Disconnect the machine from the power supply.
Clean the machine entirely.
Lubricate the gliding surface of the vice and the blade slightly with some machinery oil.
Clean the coolant tank from metal chips.
monthly: change coolant liquid, clean coolant tank and filter entirely!
HOLZMANN Maschinen Austria
Bedienungsanleitung Metallbandsäge BS 128HDR
Don't clean or do maintenance on the machine while it is still con-
nected to the power supply:
Damages to machine and injuries might occur due to unintended
switching on of the machine!
Therefore: Switch the machine off and disconnect it from the power
supply before any maintenance works or cleaning is carried out
www.holzmann-maschinen.at
A T T E N T I O N
WARTUNG
Seite 28
Metallbandsäge BS 275GP