Programming Example - Dal Zotto Edy Manual Del Usuario

proGramminG example

let's suppose that the weekly programmer function is to be used and the 2 time slots are to be used in the following way:
- 1st time slot: from 08:00 to 12:00 every day of the week, with room temperature at 19°c, excluding saturday and sunday
- 2nd time slot: from 15:00 to 22:00 only on saturday and sunday, with room temperature at 21°c
CONTrOls prOCeDUre:
press key 5 and seT ClOCK will appear.
press key 2 until enable chrono appears
- enable the chrono
- enable slot 1 and 2.
- press key 1 to exit
* Where "enable chrono" is not present
in the menu, enabling is done directly in
seT chrono.
press key 2 and seT chrono will appear.
press key 5 to confirm and continue
programming.
The scrolling text
sTarT prg1 OFF will appear.
1sT Time slOT swiTCh-ON
Using keys 2 - 3, enter the time "08:00",
which corresponds to the switch-on time of
the 1st time span. The sTarT prg1 text will
appear followed by the time set.
To confirm and continue programming,
press button 5. press button 4 to go back to
the previous parameter.
2ND Time slOT swiTCh-ON
at this point, the second time slot must be programmed.
The sequence to be followed is the same and is repeated as per the 1sT Time slOT swiTCh-ON.
On this occasion simply enter the time, for example start at 15:00 and stop at 22:00 and to activate the days saturday and sunday by setting
them at "ON".
When The Weekly proGrammer is acTiVe, a box of The relaTiVe icon Will appear on The
conTrol boarD.
42
1sT Time slOT swiTCh-OFF
seT
Using keys 2 - 3, enter the time "12:00",
clock
which corresponds to the switch-off time
of the 1st time period. The sTOp prg1 text
will appear followed by the time set.
To confirm and continue programming,
press button 5. press button 4 to go back to
enable
the previous parameter.
chrono
eNaBliNg The 1sT Time slOT Days
To do this, use keys 3 and 5 in the following
way:
seT
Key 5 - allows to scroll the various days,
chrono the scrolling text with the day of the week,
followed by OFF.
Use key 3 to enable-disable (ON/OFF) all
days.
sTarT
prG1
press key 5 to confirm and continue
programming.
The text sTarT prg2 OFF will appear.
off
2ND Time slOT swiTCh-ON
sTarT
at this point, the second time slot must be
prG1
programmed.
The sequence to be followed is the same
and is repeated as per the 1sT Time slOT
swiTCh-ON.
08:00
ENGLISH
sTop
prG1
12:00
monDay..
prG1
on-off
sTarT
prG2
on-off
sTarT
prG2
15:00