Calculating Charge Time - Schumacher Electric DSR Industrial series Manual Del Usuario

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

Aborted Charge

If charging can not be completed normally, charging will abort. When charging

aborts, the charger's output is shut off, and the CHECK BATTERY (red) LED

will blink. To reset after an aborted charge, disconnect the battery.

Desulfation Mode

If the battery is left discharged for an extended period of time, it could become

sulfated and not accept a normal charge. If the charger detects a sulfated

battery, the charger will switch to a special mode of operation designed for

such batteries. If successful, normal charging will resume after the battery is

desulfated. Desulfation could take up to 10 hours. If desulfation fails, charging

will abort and the CHECK BATTERY (red) LED will blink, have the battery

checked.

Completion of Charge

Charge completion is indicated by the CHARGED (green) LED. When lit, the

charger has stopped charging and switched to the Maintain Mode of operation.

Maintain Mode

When the CHARGED (green) LED is lit, the charger has started Maintain

Mode. In this mode, the charger keeps the battery fully charged by delivering a

small current when necessary.

General Charging Notes

Fan: The charger is designed to control its cooling fan for efficient operation.

Consequentially, it is normal for the fan to start and stop when maintaining a

fully charged battery. Keep the area near the charger clear of obstructions to

allow the fan to operate efficiently.

13.