Slendertone Ab S6 Manual De Instrucciones página 8

quick guide to solving problems
Problem
Possible Cause
The display doesn't come on
The battery is low
and there is no signal from
the controller
The display is on but there
The battery is low
is no signal
The battery symbol is flashing
The battery is low
The The symbol has appeared symbol has appeared
The controller is not properly
on the display*
connected to the belt
The covers are still on the GelPads
The GelPads are worn
The GelPads are not covering
the studs
Unpleasant feeling beneath
Poor pad contact with the skin
the GelPads
The GelPads are worn
GelPads are not covering the
metal studs
Too many consecutive sessions
The contractions are very
The GelPads are worn
weak even when the training
intensity is high
The battery is low
Poor pad positioning
GelPads are not covering the
studs
Error message
"Err" appears on the display
* The symbol always appears in conjunction with the left/ right intensity indicators. If the left
* The symbol always appears in conjunction with the left/ right intensity indicators. If the left
indicator appears, there is a problem with the left GelPad, the right indicator acknowledges a problem
with the right GelPad and if both indicators appear there is a problem with the either the middle pad or
all three GelPads.
14
Solution
Recharge the battery
Recharge the battery
Recharge the battery
Ensure the controller and belt are
properly connected
Remove the covers from the GelPads
Visit www.slendertone.com or contact
Customer Careline for new GelPads
Make sure the GelPads fully cover the
metal studs
Ensure the GelPads are pressed firmly
against the skin. Spread a few drops of
water on the surface of the GelPads.
Make sure the controller is OFF first
Visit www.slendertone.com or contact
Customer Careline for new GelPads
Reposition the GelPads so that the
metal studs are covered
You should just do one session per
day on any single body area
See www.slendertone.com or contact
Customer Careline for new GelPads
Recharge the battery
See page 7 & 8 for correct GelPad
positioning
Reposition the GelPads so that the
metal studs are covered
Switch the controller on and off. The
product should work without any
problem. If the error message persists
call the Customer Careline for further
details
how does muscle stimulation technology work?
How does muscle stimulation technology work?
6 uses electro muscle stimulation (EMS) technology. This technology has been used in
SLENDERTONE ABS
hospitals and by physical therapists for over 50 years. Here is a summary of how EMS technology works.
The special 3-pad design ensures that all of the abdominal muscles contract and not only
SLENDERTONE
those directly under the GelPads.
Step 1
Signals are sent The signals switch on
between the GelPads the nerves which control
the abdominal muscles.
6 has all the components of an effective abdominal toner.
SLENDERTONE ABS
1. Your product has 21µC (micro coulombs) of toning power. This allows you to generate strong,
effective muscle contractions.
2. Your 6 uses large, medical-grade GelPads. These ensure that your workout is
SLENDERTONE ABS
comfortable.
3. The toning belt's EMS technology has been clinically tested and is proven to give you firmer,
stronger, more toned abdominal muscles in 8 weeks.
4. Your product has seven programs which cater to a whole range of training levels from the beginner
to advanced users.
: Your toning belt will not help you lose weight. For this you need to do some form of cardiovascular
NOTE
exercise e.g. walking, cycling, swimming, jogging. However using your toning belt regularly will give
you stronger, firmer, and more toned abs.
Step 2 Step 3
The nerves, in turn, cause
your muscles to contract
and relax rhythmically.
15