Safety Devices; Warranty; Maintenance And Metrological Verification; Unpacking - Repackaging - Metrix MX 24B Manual De Instrucciones

Chapter II
∗ Two HBC fuses provide protection up to 600 V during measurements of intensity
type.
∗ An IP protection rating of 40.
1.3.

Safety devices

∗ The battery unit cannot be accessed without first disconnecting the measuring
leads.
∗ When measuring voltages above 24 V, the sign blinks
∗ When measuring voltages above 10 A, the sign blinks
intermittent audible signal warns the user.
∗ If the maximum range is repeatedly exceeded, an intermittent audible signal warns
the user in V
10 A
DC
1.4.

Warranty

This equipment is warranted against any defects of manufacture or materials according to
the general conditions of sale.
During the warranty period (3 years), defective parts will be replaced, the manufacturer
reserving the right to repair or replace the product. In the event of the equipment being
returned to the distributor or to a local agency, carriage to the centre shall be payable by
the customer. The warranty does not cover the following :
1. Repairs necessitated by misuse of the equipment or use in association with
incompatible equipment.
2. Modification of the equipment or any related software without the explicit
authorization of the manufacturer.
3. Repairs necessitated by attempts to repair or maintain the product made by a person
not approved by the manufacturer.
4. Adaptation to a specific application not provided for in the specifications of the
equipment or the user manual.
5. Damage after a drop, a shock or flooding.
1.5.

Maintenance and metrological verification

Return your instrument to your distributor for any work to be done within or outside the
guarantee.
1.6.

Unpacking - Repackaging

This equipment has been fully checked out mechanically and electrically before shipping.
All precautions have been taken to ensure that the instrument arrives at its destination
undamaged. However, it is advisable to carry out a rapid check for damage sustained in
shipping. If there is any evidence of damage, make this known immediately to the
shipper.
G
Should you need to return the multimeter, preferably use the original packaging
and indicate the reasons as clearly as possible on an accompanying note.
F
Our products are patented in FRANCE and internationally and the logotypes are
registered. We reserve the right to modify specifications and prices as required by
technological improvements.
5000-count portable digital multimeter, with current input
, V
LOW Z AC+DC
, 10 A functions.
AC+DC
, V , ADP , ADP
DC DC AC+DC,
on the display.
on the display and an
500 mA 500 mA
DC, AC+DC
,
17