z
q
x
w
e
c
v
b
t
z
x
q
c
r
e
r
w
e
CARE OF YOUR MACHINE
WARNING:
Turn the power switch off and unplug the machine
before cleaning.
NOTE:
Do not dismantle the machine in any way other than
what is explained in this section.
Clean the outside of the machine with a soft cloth and
mild soap.
Cleaning the Hook Race and Feed Dog
z Remove the presser foot and needle. Remove screw
on the needle plate with the screwdriver.
Remove the needle plate and take out the bobbin.
q Screw
x Lift up the bobbin holder and remove it.
w Bobbin holder
c Brush out dust and lint. Wipe the bobbin holder with
a soft, dry cloth.
v Clean the feed dog and hook race with the lint
brush.
e Lint brush
r Feed dog
b Wipe the hook race with a soft, dry cloth.
t Hook race
NOTE:
You may also use a vacuum cleaner.
Replacing the Bobbin Holder
z Insert the bobbin holder into the hook race.
x Make sure the knob of the bobbin holder fits next to
the stopper on the race.
q Knob
w Stopper
c Replace the bobbin.
Attach the needle plate, inserting the two guide pins
into the holes in the needle plate. Tighten the screw
firmly with the screwdriver.
e Guide holes
r Screw
62