Z I PP IE X' CA PE
N. FOLDING AND UNFOLDING
Possible pinch point! BE CAREFUL.
1. If seat sling is not present during folding or unfolding, use the "Push to lock Tab" to open the chair.
2. Use flat palms to depress the chair if opening.
1. Folding the Wheelchair
a. Remove quick-release wheels (optional).
• Depress quick-release button on the axle.
• Remove wheel by sliding out quick-release axle from axle bracket.
• Repeat with the other wheel.
b. Flip up the footrests to a vertical position before folding the wheelchair.
c. Grasp the seat sling (folding strap (A) and lift up sharply until the wheelchair is folded.
2. Unfolding the Wheelchair
a. Replace quick-release wheel (optional) by depressing the quick-release button on the axle.
b. Slide it into the axle sleeve until it locks.
c. Repeat with other wheel.
d. Tilt the wheelchair toward you far enough to take the weight off the opposite wheel.
e. Push down on the center of the seat sling, Elastic window, and Locking tab (B) until the wheelchair is
completely opened.
NOTE–
Ensure that footrests are Flipped down, and locked prior to use.
O. INTEGRATED STROLLER HANDLES
1. Positioning Swing-Away Adjustable Stroller Handles
Loosen push handle (C) by pushing the Black button (D). You can then raise or lower Stroller handle to
desired position.
NOTE - For easy storage and portability, push handles will swing in and stroller handles fold flat.
P. BACKREST
29
1. Folding the backrest
a. For easier storage and transport, Locate the backrest release pin lever (E) on both sides and pull up
on the levers while pushing the backrest forward.
2. Unfolding the backrest
a. To secure the back rest in a riding position, lift by the handles to an upright position. When secured,
the backrest release pin will lock into place.
NOTE - For easy storage and portability, push handles should fold flat and not interfere with folding.
MK-100090 RevA
25
26
27
WARNING
28
(option)
18
VIII. USE AND MAINTENANCE
A
25
26
27
28
29