Using Special Nozzles - Dirt Devil Aquaclean DD302 Manual De Instrucciones

7 Working with the hand-held steam cleaner

7.3 Using special nozzles

26
A
B
C
27
A
B
28
A
B
NOTE:
All special nozzles can only be fitted to the previ-
ously installed pinpoint nozzle. All special nozzles are
attached in the same way.
1. Fit the pinpoint nozzle as described,
taching the pinpoint nozzle".
2. If the cleaning effect of the jet of steam alone is not suf-
ficient for your cleaning task, select a special nozzle:
The wire brush (Fig. 26/A) is used to remove particu-
larly stubborn soiling from non-delicate surfaces.
90°
The plastic brushes(Fig. 26/B, large and small) are
used to remove heavy soiling from scratch-resistant surfac-
es.
The crevice brush (Fig. 26/C) works best for removing
dirt from between tiles and grooves.
The jet nozzle (Fig. 27/A) is recommended if the steam
jet has to be highly concentrated like for the pinpoint jet noz-
zle.
The spatula attachment (Fig. 27/B) is used to scrape
dirt from smooth surfaces which are not sensitive to
scratching.
The 2in1 combo attachment (Fig. 28/A) is used to
squeegee previously steamed glass surfaces. To do so, fol-
90°
low the instructions in
glass surfaces".
The 2in1 combo attachment (Fig. 28/B) with cotton
cover is used to freshen up upholstery and clothing. To do
so, follow the instructions in
upholstery and clothing".
3. Slide the respective special nozzle onto the pinpoint jet
nozzle.
4. Secure the respective special nozzle by turning it 90° in
the direction of the arrow.
NOTE:
By turning is in the opposite direction you can release the
90°
respective special nozzle again.
Chapter 7.2, "At-
Chapter 7.4, "Steam-cleaning
Chapter 7.5, "Freshening up
53