Troubleshooting - Unold 48016 Instrucciones De Uso

Cleaning the vacuum packing container
1. The vacuum packing container
can be cleaned in warm water
with a little dishwashing detergent
added.
2. The container (without the lid) can
also be washed in the dishwasher.

TROUBLESHOOTING

Problem
No function when a button is
pressed.
No vacuum can be created.
The bag loses the vacuum.
Please place the basket only in
the top basket of the dishwasher.
3. Dry the container and the lid care-
fully before reusing them.
Solution
ƒ Check to make sure that the appliance is
correctly plugged into the power supply.
ƒ Check for damage to the power cord.
ƒ Check to make sure that the power outlet
you are using functions properly by plug-
ging another appli-ance into it.
ƒ Check for holes in the bag. To do so, you
can seal the bag so that there is still some
air in it. Place the bag in water and press
down on it somewhat. If air bubbles rise
from the bag, there is a hole in it. Please
use a new bag.
ƒ If you are using a bag you have made your-
self, check the sealing strip of the bag.
If there is a crease in the sealing strip,
this prevents air from being drawn from
the bag. Cut the bag off at this point and
seal it again.
ƒ Check the sealing strip of the bag. If
there is a crease in the sealing strip, no
vacuum can be created. Open the bag
and vacuum pack it again.
ƒ Remnants of fat, liquids, crumbs, etc.
in the vicinity of the sealing bar can
cause the air to escape. Open the bag,
clean the affected area thoroughly and
vacuum pack it again.
ƒ Foods with sharp edges, such as bones,
can damage the bag. In this case, you
will have to use a new bag. If you wish
to vacuum pack such foods, first wrap
them in a paper towel.
27