Playing Repeatedly; Repeat Play - Sony MHC-GNX660 Manual De Instrucciones

To Do this
Select a disc when Press one of the DISC 1 ~ 3
playback is stopped buttons or DISC SKIP/EX-
CHANGE (or DISC SKIP on
the remote).
Switch to CD Press one of the DISC 1 ~ 3
function from buttons (Automatic Source
another source Selection).
Exchange other Press DISC SKIP/EX-
discs while playing CHANGE.
Remove a disc Press Z OPEN/CLOSE.
1)
The elapsed playing time may not be displayed
correctly depending on the MP3 audio tracks.
2)
(MHC-GNX660 only)
You cannot find a point in a track when playing a
CDG.
Notes
• You cannot change the play mode during playback.
• The following discs with MP3 audio tracks take a
longer time to start playback.
– a disc recorded with complicated tree structure.
– a disc recorded in Multi Session.
– a disc to which data can be added (non-finalized
disc).
• When the disc with MP3 audio tracks is loaded, the
system reads all the tracks on that disc. If there are
many albums or non-MP3 audio tracks on the disc, it
may take a longer time for playback to begin or for
the next MP3 audio tracks to start playback.
• You are recommended not to save other types of
tracks or unnecessary albums on a disc that has MP3
audio tracks.
• Attempting to play back non-MP3 format files that
have the extension ".MP3" may result in noise or
malfunction.
• The system can play back to a depth of 8 folders
only.
• When naming the MP3 audio tracks, be sure to add
the file extension ".MP3" to the file name.
• An album that does not include an MP3 audio track
is skipped.
• The maximum number of albums on a disc which can
be recognize by this system is 150 (including root
album).
• The maximum number of MP3 audio tracks and
albums on a disc which can be recognize by this
system is 300.
• Depending on the encoding/writing software,
recording device, or the recording media used at the
time an MP3 audio track is recorded, you may
encounter problems such as cannot play back, sound
interruptions and noise.
Tips
• When you press CD or one of the DISC 1 ~ 3 buttons
to switch to "CD" function from "TUNER" function,
you may require a longer time to access the disc. In
this case, set the CD power manage function to "CD
POWER ON" (page 14).
• If you press CD while the system is turned off, the
system turns on automatically and "CD" is selected
as the function.
• You can also press FUNCTION on the remote
repeatedly to select "CD".
• (MHC-GNX660 only)
When you play back a CDG, some operation may
cause image distortion on the video output.
• During Shuffle Play, some tracks may be played
back repeatedly.

Playing repeatedly

— Repeat Play

You can play back all the tracks or a single track
on a disc repeatedly.
Use buttons on the remote for the operation.
Press REPEAT repeatedly during playback
until "REP" or "REP1" lights up in the
display.
REP: All the tracks on the disc(s), or all the
1)
tracks in the album are played back repeatedly
2)
up to five times .
REP1: A single track is played back repeatedly
until "REP1" is cancelled.
1)
When "ALBM" is selected for MP3 audio tracks.
2)
For MP3 audio tracks, the play back is endless when
the play mode is "1 DISC SHUF" or "ALBM
SHUF".
To cancel Repeat Play
Press REPEAT repeatedly until both "REP" and
"REP1" disappear from the display.
Note
You cannot select "REP" and "ALL DISC S SHUF" at
the same time.
Tip
You can change the Repeat Play setting when the
playback is stopped.
11 GB