Display; Turning Off The Display; Power Saving Mode - Sony MHC-GNX660 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Other operations
To
Do this
Check the setting
Press CLOCK/TIMER
1
SELECT.
"SELECT" appears in the

display.

Press –. or >+
2
repeatedly to select "REC
SELECT", then press
ENTER.
Change the setting
Start from step 1.
Cancel the timer
Press CLOCK/TIMER
1
SELECT.
"SELECT" appears in the
display.
Press –. or >+
2
repeatedly to select "TIMER
OFF", then press ENTER.
Notes
• You cannot select the Play Timer and Timer
Recording at the same time.
• If you use the Timer Recording and the Sleep Timer
at the same time, the Sleep Timer has priority.
• The Timer Recording will not be activated if the
system is turned on.
• The volume is reduced to minimum during Timer
Recording.
• Do not operate the system from the time the system
turns on until the recording starts (about 15 seconds
before the preset time).
Tips
• The system turns on 15 seconds before the preset
time.
• When the Timer Recording is selected, "REC" lights
up in the display.
Display

Turning off the display

— Power Saving Mode

The demonstration display and the clock display
can be turned off to minimize the amount of
power consumed during standby mode (Power
Saving Mode).
Press DISPLAY repeatedly while the
system is turned off until the
demonstration display and the clock
display disappears from the display.
To cancel Power Saving Mode
Press DISPLAY repeatedly while the system is
turned off. Each time you press the button, the
display changes cyclically as follows:
Demonstration
1)
t Clock
(Power Saving Mode)
1)
The display changes and the indicators flashes even
when the system is turned off.
2)
"--.--" appears in the display if you have not set the
clock.
Note
You cannot do the following operations during Power
Saving Mode:
– Setting the clock (page 9).
– Changing the AM tuning interval (page 14).
– Turning on the system by pressing the function
buttons (CD, TAPE A/B, TUNER/BAND or TV).
– Changing CD power manage setting (page 14).
Tips
• The timer continues to operate in Power Saving
Mode.
indicator lights up even in the Power Saving
?/1
Mode.
2)
t No display
23
GB

Hide quick links:

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mhc-gnx600

Tabla de contenido