Recording On A Tape Manually; Manual Recording - Sony MHC-GNX660 Manual De Instrucciones

Recording on a tape
manually

— Manual Recording

You can record just the portions you like from a
disc, tape or radio program on a tape.
You can also record from connected
components (see "Hooking up optional
components" on page 26).
1
Load a recordable tape into Deck B.
2
Press CD, TAPE A/B, TUNER/BAND or
TV (or FUNCTION on the remote
repeatedly) to select the source you
want to record.
3
Load the disc, tape or tune to the
preset radio station you want to record.
To record from the connected
component, connect the external audio
sources.
4
Press REC PAUSE/START.
"REC" flashes in the display.
Deck B standby for recording.
5
Press REC PAUSE/START again.
"REC" lights up in the display.
Recording starts.
6
Start playing the source to be
recorded.
To stop recording
Press x.
Note
You cannot listen to other sources while recording.
Tips
• For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
• For recording from a disc to a tape manually:
You can turn and hold . OPERATION DIAL
> clockwise or counterclockwise and release it
when you reach the track you want (or press –.
or >+ on the remote repeatedly to select tracks)
during recording pause (after step 4 of "Recording on
a tape manually").
• For recording an album of MP3 audio tracks:
Press PLAY MODE on the remote repeatedly until
"ALBM" lights up in the display. Then press
ALBUM +/– repeatedly to select the album you want
after step 4 of "Recording on a tape manually".
17 GB