Mounting Diagram - PRESIDENT EMPEROR KENJI Manual Del Usuario

Welcome to the world of the new generation of CB
radios. The new EMPEROR range gives you access to top
performance CB equipment. With the use of up-to-date
technology, which guarantees unprecedented quality,
your EMPEROR KENJI is a new step in personal commu-
nication and is the surest choice for the most demand-
ing of professional CB radio users. To ensure that you
make the most of all its capacities, we advise you to
read carefully this manual before installing and using
your EMPEROR KENJI.
A) INSTALLATION
1) WHERE AND HOW TO MOUNT YOUR MOBILE CB RADIO
a) You should choose the most appropriate setting from a simple and practical
point of view.

MOUNTING DIAGRAM

b) Your CB radio should not interfere with the driver or the passengers.
c) Remember to provide for the passing and protection of different wires (e.g.
power, antenna, accessory cabling) so that they do not in any way interfere
with the driving of the vehicle.
d) To install your equipment, use the cradle (1) and the self-tapping screws [2]
provided (drilling diameter 3.2 mm). Take care not to damage the vehicle's
electrical system while drilling the dash board.
f) Choose where to place the microphone support and remember that the
microphone cord must stretch to the driver without interfering with the
controls of the vehicle.
- N.B. : As the transceiver has a frontal microphone socket, it can be set into the
dash board. In this case, you will need to add an external loud speaker to
improve the sound quality of communications (connector EXT.SP situated on
the back panel: C). Ask your dealer for advice on mounting your CB radio.
25