Front Panel (Vca Section) - ARP 2600 FS Manual Del Usuario

ARP 2600 FS

Front panel (VCA section)

INITIAL OSCILLATOR FREQUENCY INITIAL OSCILLATOR FREQUENCY
a
j
i
h
g
f
b c d e
VCA (Voltage Controlled Amplifier)
a . INITIAL GAIN slider
Adjusts the CV offset voltage of the VCA.
b . AUDIO input 1 jack
This is the input jack for the VCA audio signal. The VCF is internally connected.
c . AUDIO input 2 jack
This is the input jack for the VCA audio signal. The ring modulator is internally
connected.
d . CV input 1 jack
This is the CV input jack that controls the VCA gain. The AR EG is internally
connected.
The VCA gain is proportionally related to this CV voltage.
e . CV input 2 jack
This is the CV input jack that controls the VCA output. The ADSR EG is
internally connected.
The VCA gain is exponentially related to this CV voltage.
f . AUDIO input level 1 slider
Adjusts the audio signal level of VCA AUDIO input 1.
g . AUDIO input level 2 slider
Adjusts the audio signal level of VCA AUDIO input 2.
h . CV input level 1 slider
Adjusts the signal level of VCA CV input 1.
i . CV input level 2 slider
Adjusts the signal level of VCA CV input 2.
j . Output jack
This is the VCA output jack. It outputs an audio signal whose volume varies
according to the CV signals from CV input 1 and CV input 2.
If the INITIAL GAIN slider (a) is moved all the way to the right, the audio
signal is output continuously without stopping.
- 12 -