Side Panel L (Midi, Usb, Mode Switch) Side Panel R (Power, Main Output Jacks); Power Connector - ARP 2600 FS Manual Del Usuario

Side panel L (MIDI, USB, MODE SWITCH)
Side panel R (power, main output jacks)
INITIAL OSCILLATOR FREQUENCY INITIAL OSCILLATOR FREQUENCY
a
b
e
c
d
f
MIDI
a . MIDI IN connector
You can connect an external MIDI device to this connector to receive MIDI data.
b . MIDI OUT connector
You can connect an external MIDI device to this connector to transmit MIDI
data.
c . MIDI THRU connector
The MIDI messages that are input via the MIDI IN connector are output without
change from this connector.
USB
d . USB B port
You can connect a computer to this port to transmit and receive MIDI data.
MODE SWITCH
This switch lets you set the MIDI channel and the auto power-off setting.
e . MODE SWITCH1–5
The combination of switches 1–4 specifies MIDI channel 1–16 (see "MIDI
channel" on page 24). Switch 5 enables or disables the auto power-off
function. (see "Changing the auto power-off setting" on page 21).
g
f . TO 3620 connector
Use the included 8-pin DIN cable to connect this to the ARP 3620 keyboard unit.
Main output jacks
h
g . Main output L
Outputs the L channel audio signal of this unit. This is an XLR connector
(balanced). 1: GND, 2: HOT, 3: COLD
h . Main output R
Outputs the R channel audio signal of this unit. This is an XLR connector
i
(balanced). 1: GND, 2: HOT, 3: COLD

Power connector

i . ~ ACV connector
Connect the included AC power cord here.
- 17 -