Stihl HSA 65 Manual De Instrucciones página 12

English
Be particularly alert and cautious when
wearing hearing protection because
your ability to hear warnings (shouts,
alarms, etc.) is restricted.
Warning!
To reduce the risk of fire, always clean
plant residue, chips, leaves and excess
lubricant off the motor.
After Finishing Work
Always clean dust and dirt off the power
tool – do not use any grease solvents for
this purpose.
Spray the blades with STIHL resin
solvent. Run the motor briefly so that the
solvent is evenly distributed.
MAINTENANCE, REPAIR AND
STORING
If you make a warranty claim for a
component which has not been
serviced or maintained properly or if
nonapproved replacement parts were
used, STIHL may deny coverage.
Warning!
Use only identical STIHL replacement
parts for maintenance and repair. Use of
non-STIHL parts may cause serious or
fatal injury.
Strictly follow the maintenance and
repair instructions in the appropriate
section of your instruction manual.
Please also refer to the maintenance
chart in this manual.
10
Always move retaining
latch to ƒ and remove
the battery from the
power tool before carry-
ing out any repairs or
maintenance work, such
as replacing the cutting
blades. This avoids the
risk of the motor starting
unintentionally.
Warning!
Always switch off the motor, move
retaining latch to ƒ, remove the battery
and make sure that the cutting tool is
stopped before doing any maintenance
or repair work or cleaning the power
tool. Do not attempt any maintenance or
repair work not described in your
instruction manual. Have such work per-
formed by your STIHL servicing dealer
only.
Wear gloves when handling or
performing maintenance on the blades.
Warning!
Never repair damaged cutting attach-
ments by welding, straightening or mod-
ifying the shape. This may cause parts
of the cutting blades to come off and
result in serious or fatal injuries.
Keep the cutting blades sharp. Tighten
all nuts, bolts and screws after each use.
Regularly check the electrical contacts
and ensure that the insulation of the
power cord and plug of the charger is in
good condition and shows no sign of
ageing (brittleness).
Electrical components, e.g. power cord
of charger, may only be repaired or
replaced by a qualified electrician.
Clean plastic components with a cloth.
Do not use aggressive detergents. They
may damage the plastic.
Do not spray the machine with water.
Do not clean your machine with a
pressure washer. The solid jet of water
may damage parts of the machine.
Clean cooling air inlets in motor housing
as necessary.
Keep the battery guides free from
foreign matter – clean as necessary.
Store the power tool in a dry, locked
location with the retaining latch on ƒ,
the battery removed and out of reach of
children.
HSA 65