Technical Description - Gumotex SEAWAVE Manual De Usuario

User's Manual
• A recreational vessel designed for use on internal waterways with an expected wind strength reaching
Grade 4 on the Beaufort Scale inclusive and a determining wave height of up to 0.3 metres inclusive, with
occasional waves up to 0.5 metres of height caused e.g. by vessels passing by.
• The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category IIIB.
• Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.
Dear Customer,
This manual will help you to easily and safely master your vessel.
It contains a detailed description of the vessel, the supplied or built-in
equipment, its sets as well as information about its control and mainte-
nance. Please read it carefully, thereby getting to know the boat before
actually using it.
If this is your fi rst vessel or you have changed the type of vessel and
do not know this type well, please get acquainted with its maintenance
and control prior to your fi rst individual use of the vessel so that it is safe
and comfortable. Your dealer or the National Yacht Federation or club
will recommend you appropriate training courses or qualifi ed instructors.
Do not pull off until the expected sailing conditions (wind strength and
wave height) are appropriate for the construction category of your vessel
and you and your crew are able to control it in these conditions.
Please store this manual in a safe place and hand it over to the new
owner should you sell the vessel.
1. Table of Specifications
(indicative values)
Length (cm)
Width (cm)
Number of air chambers
Dimensions - packed in carry bag (cm)
Dimensions - packed in cardboard (cm)
Maximum operational pressure
Weight (kg)
Load (kg)
Maximum number of people
Draught (cm)
The highest anchor above surface (cm)

2. Technical Description

- See Picture 1
1. Sidewall cylinder
2. Bottom
3. PUSH/PUSH valve
- for infl ating/defl ating the kayak, regulating pressure and
measuring pressure using a manometer
4. Relief valve
5. Manufacturer's label
6. Yellow "WARNING" label
7. Infl atable seat
8. Front footrest sized 34x16 mm
9. Rear footrest sized 45x19 cm
10. Screw valve for small chambers
(seats, leg rests, etc.)
8
SEAWAVE
KAYAK
TABLE OF CONTENTS:
1. Table of Specifi cations
2. Technical Description
3. Infl ation Instructions
4. Using the Boat
5. Storage of the Boat
6. Treatment and Storage
7. Guarantee Conditions
8. Boat Repairs
9. Product Disposal Method
10. Packaging Disposal Method
11. Manufacturer's Label
- legend of symbols used
12. Safety Caution
0,025 MPa [0,25 Bar/3,75 PSI]
11. Board
12. Handle
13. Weep hole
14. Safety rope
15. Skeg-fi n attachment
16. Seat and footrest (bottom) attachment anchor point
17. Seat attachment chamber anchor point (chamber anchor
points are marked with numbers 1, 2 and 3 for one-,
two- or three-seat version, respectively)
18. Strut anchor point
19. Seat mounting strap
20. Seat plastic buckle
ACCESSORIES SUPPLIED WITH THE KAYAK:
Transportation bag, compression belt for folded kayak,
User's Manual with Warranty Certifi cate, foam sponge in
VERSION 9/2019
GB
Page 8
SEAWAVE
455
83
3 + 3 + 2
68 × 43 × 30
70 × 47,5 × 32
17,5
250
3
15
28
8
9
9
10
10
10
10
10
10
10
11