Neo XXL
| Electric Wheelchair
4.1.2. R-net control
24
25
62
Charger and
Programmer Socket
Electric Wheelchair |
ON/OFF button
Press this button to switch on the wheelchair (fig. 26). The electrical
components are then also enabled.
Signal horn
Press this button to sound the horn (fig.
27).
Setting the mode
Press these buttons to change the mode, i.e. increase (right) or reduce
(left) the maximum available speed. The speed is controlled by
movement of the joystick (fig. 28).
Mode
This button allows you to select the available modes (fig. 29). The mo-
des depend on the programming and the electrical components that
are also connected.
Bischoff & Bischoff GmbH | 01.06.2019
Neo XXL
26
27
28
29
63