Lcd And The Most Important Symbols - B+B Neo XXL Manual De Instrucciones

Neo XXL
| Electric Wheelchair
Profiles
This button allows you to select the available profiles
(fig. 30). The profiles depend on the programming and the electrical
components that are also connected. The profiles are created together
with the authorised service engineer.
30
Warning indicators
Press this button to switch on the warning indicators in emergency
situations, such as inability to move the wheelchair. All four indicator
lights will flash and signal other traffic that your wheelchair is disabled
(fig.31).
31
Light
Use this button to switch on the active lighting system of your
wheelchair when darkness falls or when travelling through dark are-
as such as tunnels. This will make you more visible to other traffic
(fig. 32)..
32
Indicators (left/right)
Use this button (fig. 33) to switch on the left or right indicators of
your wheelchair to signal other traffic that you wish to change your
direction of travel to the left or right. Press the button again to switch
off the indicators.
33
64
Electric Wheelchair |
4.1.3. LCD and the most important
symbols
Current profile
Profile name
34
Battery status display
The battery status display (fig. 35) shows the charge status.
• Continuous display means: the state of charge is sufficient.
• Slow flashing means: all functions are still working properly, but
recharging of the battery is recommended.
• Sequential flashing means: the charger is connected and the
batteries are being charged.
Speed
The current speed of the wheelchair is indicated (fig 36)
Bischoff & Bischoff GmbH | 01.06.2019
Neo XXL
Battery status
Speed
35
36
65