Use By Others; Maintenance; Lifting And Holding Points; Transport - B+B Neo XXL Manual De Instrucciones

Neo XXL
| Electric Wheelchair

9. Use by others

The Neo XXL wheelchair is suitable for continued use by others. Before it
is handed on to another user, it should be serviced by a specialist dealer
and undergo hygienic treatment. When transferring the wheelchair to
another user, please remember to give the new user this instruction
manual and the address of your specialist dealer.

10. Maintenance

Our customer service can provide a service schedule for the wheelchair

11. Lifting and holding points

Due to its weight, it is preferable to use ramps for loading the electric
wheelchair. If you need to lift the wheelchair nevertheless, only pick it
up by the frame (fig. 48) or the holding points (fig. 49 and fig. 50). Do
not grip the panel, electronics or other attachment parts. You can secure
the electric wheelchair for transport at the front and back of the frame
under the seat.
80
The wheelchair must be inspected in accordance
with the service schedule and must be in good
condition..
Electric Wheelchair |

12. Transport

You can determine whether or not your wheelchair is approved for use
as a seat in a vehicle for transporting disabled people by referring to
the symbols on the CE sticker on the product:
Wheelchair suitable for use as a seat in a vehicle for
transporting disabled people (fig. A)
Wheelchair not suitable for use as a seat in a vehicle for
transporting disabled people (fig. B)
All products approved by B+B for use as seats in vehicles are tested
in accordance with ISO 7176-19. The tests in accordance with ISO
7176-19 were performed using restraint systems from AMF-Bruns. The
correct mounting of the restraint system is a prerequisite for the safe
transportation of the products in a vehicle for transporting disabled
people and the basis for the approval.
Fixation points on the restraint system (fig. C)
The restraint systems from AMF-Bruns provide the ideal points for the
provision of restraint force for the purpose of securing the products in
the vehicle for transporting disabled people (known by the German
term „Kraftknoten", which is defined in the standard DIN 75078-2).
For the purpose of providing restraint in the vehicle for transporting
disabled people (fig. C), the products must only be secured at these
specific points („Kraftknoten" points). If possible, use a permanently
installed car seat and its belt system. Stow the wheelchair in the
luggage space. The person responsible for the transportation should be
familiar with the current regulations for transportation as well as with
the method of operating the vehicle for transporting disabled people
and the restraint system. Anchored 4-point restraint systems must be
used to secure the wheelchair in the vehicle.If you have any queries
about securing your product in a vehicle for transporting disabled
people, please contact the B+B customer service department on
+49 (0)700/60007070.
Bischoff & Bischoff GmbH | 01.06.2019
Neo XXL
A
B
C C
81