Electrical Adjustments - B+B Neo XXL Manual De Instrucciones

Neo XXL
| Electric Wheelchair
Profiles
The profile number describes which profile the wheelchair is in. The text
also describes the current profile (fig. 37).
37
Error
This symbol appears if the controller has detected an error which does
not result in the system shutting down (fig. 38).
Find an authorised service engineer in the near future to check the
system.
38
Immobiliser
To protect your wheelchair from unauthorised use or theft store it in a
locked room or activate the immobiliser (fig 39).
• Press and hold the On/Off button until you hear a beep and
release it.
• Move the joystick in the direction of travel and then to the neutral
39
position. It will beep in each position. Now the control is locked.
• Switch on the controller with the On/Off button.
• Move the joystick in the direction of travel and then to the neutral
position. It will beep in each position.
• Now the control is released.
66
Electric Wheelchair |

4.1.4. Electrical adjustments

The seat position display must be enabled.
To do this, press the mode button and then scroll (move joystick left or
right) until you have reached the seat position display. You can then
select each individual electrical adjustment.
Backrest
The backrest adjustment is now enabled (fig. 40).
Move the joystick in the direction of travel, or in the opposite direction,
to adjust the angle of the backrest. Scroll to the other adjustments as
described above.
Seat angle
The seat angle adjustment is now enabled (fig. 41).
Move the joystick in the direction of travel, or in the opposite direction,
to adjust the angle of the seat. Scroll to the other adjustments as
described above.
Footrests
The footrest adjustment is now enabled (fig. 42).
Move the joystick in the direction of travel, or in the opposite direction,
to adjust the angle of the footrest. Scroll as described above to get to
the adjustment of the individual footrests.
Bischoff & Bischoff GmbH | 01.06.2019
Neo XXL
40
41
42
67