Using The Lcd Screen; Programming The Remote Control - MELICONI Logic 12 Manual De Instrucciones

LEARN button: to activate the pick up
and storage function of the signals on the
original remote controls
12 buttons of varying function (on the sides
of the LCD screen): transmit the signal
corresponding to the function viewed in the
area next to the screen
LCD screen: view the functions associated
with the 12 adjacent buttons, and in the up-
per part view other usage information.
USE button: to select which device you
want to control from among those available
In order to control the audio volume +/–
LIGHT button: activates the background-
light on the keypad and the LCD screen
Thanks to the LCD screen, the Meliconi LOGIC12 remote control can view the symbols best suited to
the appliance to be controlled.
In order to select the appliance to be controlled from among those available, just press the USE
button for a second, in order to access the device selection display, and press the corresponding
button to the desired appliance that can be identified via the specific icons on the screen. N.B: only the
previously programmed USES can be selected.
For each appliance to be controlled, there are 3 different displays in total available. The first two
displays contain the numbers and symbols most commonly used by the original remote control. Lightly
pressing the PAGE button allows you to move from the first to the second display and vice versa. As well
as these, with prolonged pressure on the PAGE button, a third display is available, the user display,
that initially appears empty, and that can be personalised as you wish according to your needs.
Personalisation can be done with LEARN functions, with MEMO sequences (as shown in the following
paragraphs) or via the PC, by connecting to the www.logicmeliconi.com site and following the
instructions.

PROGRAMMING THE REMOTE CONTROL

Before it can be used, the Meliconi LOGIC12 remote control must be properly programmed. Programming
can be done easily and quickly by following the procedure indicated on the www.logicmeliconi.com
website, or by using the hard copy instructions. The procedure should be repeated for each piece of
appliance that you want to control.
26
BUTTON AND FUNCTION USE

USING THE LCD SCREEN

ON/OFF button: to turn on and off
the appliance that you are controlling
PAGE button: to select the various
pages of the LCD screen associated
with the code combined with each
Advanced functions for moving
around the MENU of the appliance
that you are controlling
To confi rm a choice
In order to move around the MENU
of the appliance that you are controlling
Advanced functions for moving
around the MENU of the appliance
that you are controlling
In order to select the next programme P+
or the previous one P-
Interrupt and reset the volume
appliance.