SCHOTT TITRONIC 110 plus Manual De Instrucciones página 40

36
2.7 Combining the TITRONIC
The following devices can be connected to the TITRONIC
- The TitroLine alpha plus Titrator
- The TR 160 manual titration controller
- A multi-functional keyboard of the TZ 2835 type, PC keyboards in AT mode
®
- A TITRONIC universal Piston Burette
- TW alpha for automatic sample preparation
For a description of the connections to be made and the functioning of the unit, please refer to chapter 4,
"Working with the TITRONIC
provided with the devices being connected to the TITRONIC
device with a power supply of its own to the TITRONIC
devices are switched off when making the connection.
Connected device
TitroLine alpha
T110, T200, TW alpha
TitroLine alpha plus
TITRONIC 110 plus
plus
TITRONIC universal
Weighing-balance:
Sartorius: A 200 S
Mettler: AB.S, PG
Mettler: AT, PM
TR 160
Keyboard: TZ 2835
3 Display
3.1 LC Display
The LCD display consists of a 4-digit, 7-segment LCD display
Fig. 7 LCD Display showing all segments.
In the process of parameterisation, the segments of the 7-segment display are used to form meaningful
abbreviations.
Set-up and first operation
®
110 plus Piston Burette with other devices
®
110 plus Piston Burette". In addition, please note the operating instructions
Cable used
Connection to the
110 plus (Fig. 15) Type no.
RS-232-C (2) TZ 3086
RS-232-C (2) TZ 3084
RS-232-C (2) TZ 3087
RS-232-C (2)
TZ 3082
TZ 3081
TZ 3083
I/O digital port Firmly connected
cable
Keyboardconnec- Firmly connected
tor, PS 2 cable
®
110 plus Piston Burette:
®
110 plus Piston Burette. If you connect a
®
110 plus Piston Burette, please make sure both
Explanations
With varying addresses in daisy-
chain operation
With varying addresses in daisy-
chain operation
With varying addresses in daisy-
chain operation
For other weighing-balance use spe-
zial cable
For use in stand-alone operation