Kollmorgen SERVOSTAR 600 Serie Manual De Instrucciones página 65

If communication works, parameters are transmitted from the servoamplifier to the com-
puter.
Then you see the start screen.
2.7.3.6 Important Screen Elements
Help Function
The online help
Key F1
Menu Bar ? or
Online HTML Help
Tool Bar
Status Bar
gives detailed information to all parameters the servo amplifier can work with.
Starts online help
Starts online help
Save to EEPROM,
required if you changed parameters.
Reset (coldstart),
required if you changed important configuration para-
meters.
Operation Mode, use Digital Velocity mode for drive test-
ing.
Disable and Enable of the amplifier's output stage via
software.
S600 Safety Guide | 2 English
Make sure, that the amplifier
is disabled (Input HW-Enable
connector X3 pin 15 must be
0 V or open)!
for the actual screen page.
with table of contents.
Kollmorgen | wiki-kollmorgen.eu | April 2016 65