Connect Your Subwoofer; Connect Your Tv Or Video Display - Harman AVR 1710S Manual Del Propietário

AVR

Connect Your Subwoofer

Use a single RCA audio cable to connect the AVR's Subwoofer connector to your
subwoofer as explained in Subwoofer Connections, on page 12. NOTE: The AVR 1710S and
AVR 171S provide connections for two subwoofers. See Manual Speaker Setup: Number
of Speakers, on page 31, for information about activating the two subwoofer outputs.
Consult your subwoofer's user manual for specific information about making connections
to it.
AVR 1710S/
AVR 171S
Use either
connector
Single
RCA Audio
Cable
(not
supplied)
TR00306_AVR_OM_161S and 171S_EMEA_B.indb 15
AVR 1610S/
AVR 161S
Powered
Subwoofer

Connect Your TV or Video Display

If your TV has an HDMI connector and you have HDMI source devices: Use an HDMI
cable (not included) to connect it to the AVR's HDMI Monitor Out connector. The AVR
1710S and AVR 171S provide HDMI connections for two TVs (only HDMI Out 1 has ARC
and enables you to view the AVR's on-screen menus). This will provide the best possible
picture quality.
AVR 1710S/AVR 171S AVR 1610S/AVR 161S
Use HDMI
Out 1 for
the primary
HDMI Cable
display
(not supplied)
If your TV does not have an HDMI connector or if your TV does have an HDMI
connector but you are connecting some source devices with only composite video
connectors: Use a composite video cable (not included) to connect the AVR's Composite
Monitor Out connector to your TV's composite video connector.
AVR Composite
Monitor Out Connector
Composite Video Cable
(not supplied)
NOTE: If you use only the composite video connection to your TV, you will not be able to
view the AVR's on-screen menus.
Making Connections
TV
TV
15
26/05/15 2:29 pm