Install The Seat - Kohler K-4744 Guía De Instalación Y Cuidado

K-3608
K-3607
Supply Line

3. Install the Seat

When installing the seat to the K-3608 toilet, run the power cord
and supply line through the opening in the toilet.
NOTE: For the K-3607 toilet, route the cord and supply line
alongside the inside tank wall to not interfere with the fill valve
operation.
When installing the seat to the K-3607 toilet, run the power cord
and supply line through the opening in the tank, through the
tank and out the opening in the back of the tank.
Slide the seat onto the mounting plate until you feel it snap into
place.
NOTE: The mounting plate may need to be adjusted to properly
align the seat.
To adjust the seat position, remove the seat by pressing in the
release button and sliding the seat forward.
Reposition the mounting plate as needed.
Reinstall the seat. Repeat the adjustment procedure as needed
until seat is properly aligned.
Kohler Co.
Mounting
Release Button
Plate
Power Cord
11 1093479-2-A