Using Sensorsafe - CYBEX gold ETERNIS S Manual Del Propietário

Receiver Plug:
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment should be installed and operated with
minimum distance 7.87 in (20 cm) between the radiator & your body.
1. INSTALL THE SENSORSAFE RECEIVER.
Locate the 16PIN OBDII port
vehicle Owner's Manual for location. Plug in the SensorSafe
Receiver. If unable to locate your vehicle manual, the
SensorSafe Application may contain information regarding the
location of the 16PIN OBDII port for your vehicle.
Your SensorSafe Receiver will sound when it first communicates
with the vehicle network. In some vehicles this occurs
immediately after installing the SensorSafe Receiver. In other
vehicles the tone will not be heard until the vehicle has been
started.
This initialization signal only occurs one time after installation.
2. POWER UP THE VEHICLE.
118

USING SENSORSAFE

in your vehicle. Refer to your
a
®
a