Functions; Cleaning And Maintenance - Springlane Elli Manual De Instrucciones

FUNCTIONS

COOLING FUNCTION
To keep the ice cream from melting, the cooling function automatically switches on:
If the ice cream is not taken out within 10 minutes after the preparation time is up
and no other button is pressed, the ice cream machine automatically goes into coo-
ling mode for 1 hour. Afterwards, the ice cream machine goes into standby mode.
MOTOR PROTECTION FUNCTION
If the ice cream mass becomes harder, the motor can get jammed. The motor
protection function makes sure that the mixing motor automatically stops at a
hard ice cream consistency to avoid motor damage.
NOT EXCEEDING THE MAXIMUM FILLING VOLUME
The ice cream bowl should only be filled to 2/3 at the most to avoid overflowing.
The ice cream expands during the freezing process.

CLEANING AND MAINTENANCE

Before cleaning, always shut the device off, pull the power
plug from the socket, and let the device cool off.
1. Never clean the device with or under water or any other liquid. Especially the
motor and the compressor may not come into contact with water.
2. Do not use any scratching or abrasive detergents.
3. You can clean the removable parts in the dishwasher.
4. Wipe down the compressor housing with a moist cloth.
5. Dry off all parts with a soft cloth before assembling them. Before using the ice
cream machine again, all parts should be thoroughly cleaned and dried off.
34