Scan - AnyTone AT-D878UV Manual De Instrucciones

7.4.2 Add Zone
Press (Menu) to enter main Menu.
(1)
Select "Zone".
(2)
Select "Add Zone".
(3)
1. Select "Edit name"
Input zone name by keypad, press
name, press
2. Select "Edit Chan"
Select "Add Chan" then Select a channel from the list.
3. Select "Save": press
7.4.3 Delete Zone
Press (Menu) to enter main Menu.
(1)
Select "Zone".
(2)
Select a Zone from zone list.
(3)
Select Delete Zone to delete current zone.
(4)

Scan

7.5
In the PC software – Public – Scan list, it allows to save 250 scan lists, and
to program the required scan lists and write it into radio.
Switch the radio to channel mode, as the scan list is only valid in the
channel mode.
7.5.1 Turn On Scan
a.
Press (Menu) to enter the main Menu.
b.
Select "SCAN".
c. Select "Scan ON/OFF".
d.
Select "ON", the radio will start scan, press any key to stop scan.
7.5.2 Scan List Operation
a.
Press (Menu) to enter the main Menu.
b.
Select "SCAN".
c.
Select "Scan List".
d.
Select a scan list and press
Select Add Scan List to enter Sub Menu
Select Cu Chan, and press
1)
Add Channel into Scan List
2)
Select "Add Chan", then select "channel X" to add it into scan list.
AT-D878UV Digital DMR and Analog UHF/VHF Two Way Radio
7. MAIN MENU FUNCTIONS
to confirm and store.
key to store new zone.
to enter scan list sub menu.
to add current channel to active list.
key to delete. After edit right
20