Digital Monitor - AnyTone AT-D878UV Manual De Instrucciones

Report Channel: Allow user to select a channel to transmit the DMR
APRS, please set the 8 report channels in CPS-APRS-Digi page first.
Upload Slot: Allow user to select a slot to transmit the DMR APRS .
Channel Slot: It uses the slot of current channel
●
Slot 1: Use slot 1
●
Slot 2: Use slot 2
●
Digi APRS Info
(4)
The received APRS information will be saved in radio for look back use.
Click on "Digi APRS Info" will show the received APRS information.
Click on "Delete All" will clear the information.
Intervals Set
(5)
This function allows you to set the analog APRS or DMR APRS auto
transmit at fixed times.
Upload Beacon
(6)
GPS Beacon: The APRS will transmit the GPS data, only if the GPS is set
to on first, then GPS must also successfully lock on the satellites.
Fixed Beacon: The APRS will transmit the fixed beacon data. Someone
can transmit the fixed beacon without setting the GPS on. The fixed beacon
location information should be set in CPS firstly.
Note:
More setup are available by PC software only. CPS-Tools-Options-
APRS, you have to check on the APRS box first to get APRS menu add to
the left Digital menu.
(APRS is a registered trademark of Bob Bruinga, WB4APR)

Digital Monitor

7.11
a.
Press (Menu) key to enter main menu, press
choose Digi Moni function.
b. Press Select to enter Digi Moni menu, press
sub menu.
DigiMoni Switch
1)
off: Turn off Digital Monitor
Single Slot: Monitor the current TS
Double Slot: Monitor TS1 and TS2
DigiMoni Cc
2)
Any Cc: Monitor any color code
Same Cc: Monitor the same color code
AT-D878UV Digital DMR and Analog UHF/VHF Two Way Radio
7. MAIN MENU FUNCTIONS
/ key to
/ key to choose a
34